Avoid This Common Trap!
From the ,multiplier chart ,below, we can ,see that the, multiplier for, a 30º bend is exactly ,2. That's why, many electricians, will bend, nothing except 30º offsets; the math needed is simple and easy. This practice also results in unnecessarily sharp bends, harder wire pulls, and often additional junction boxes. It can also add time and money to the job and cause additional work during wire pulls. This practice is easy...
Friday, 1 April 2016
What is an Offset Bend?
What is an Offset Bend?
One of the more, common ,bends made, in electrical ,conduit ,is the offse,t bend: a technique, used to move ,a run of conduit, a set distance to one side, up or down. It is very rare that conduit can be placed in a straight line along the entire distance needed. There will usually be small projections in the way, other equipment to navigate around, or other reasons to move the conduit over some distance.While bending conduit,...
Check for ceiling water
Check for ceiling water \
damage and wall waterdamage. If the drywall is just stained, you can fix it with a stain blocking primer and new paint. Stop the water!This article contains some real how to information! not just a bunch of text to get you to click on links. I will give you some real practical advice on how to clean up and repair water damage whether it be...
.jpg)
